FOAM CUTTERS |
 |
 |
|||||
|
|||||||
|
|||||||
THE HOT ROD SYSTEMSuper-Duty, 50-Amp, EPS Panel Cutter |
|
|
| Heating 7-1/2-inch or longer material is a snap, and with the new groove-cutting adapters, you'll have an even greater range of cutting options. The Hot Rod utilizes a small, 5-inch-square compartment that houses the transformers, and a generous 9-foot cable to the cutting head allows for plenty of room to perform your task. |
| ITEM # | |
|
| *HR | Hot Rod Only | $ 1,205.00 |
| KITHRK | Hot Rod Kit, * = Kit Contents | 1,601.00 |
| *300 | 3" Straight Blade | 36.00 |
| *450 | 4-1/2" Straight Blade | 38.00 |
| *600 | 5-1/2" Straight Blade | 44.00 |
| *800 | 7-1/2" Straight Blade | 46.00 |
| *G50 | 1/2" Curve Blade | 44.00 |
| *G75 | 3/4" Curve Blade | 44.00 |
| *G100 | 1" Curve Blade | 44.00 |
| *G75SP | 3/4" Curve Blade with Lip | 55.00 |
| *SPV | 3/4" V Groove with Lip | 55.00 |
| *SPSQ | 3/4" Square Groove with Lip | 55.00 |
| STOP S | Short Ceramic Stop | 10.00 |
| *STOP L | Long Ceramic Stop | 10.00 |
|
* Included in Hot Rod Kit Contents Note: The blades and stops are the
same as listed for the Hot Knife. Please
order them from the Hot Knife Blades
and Ceramic Stops page. |
||
| |
HR, Hot Rod Only -- $1,205.00 | |
| |
KITHRK, Hot Rod Kit -- $1,601.00 | |
| |
International Tool (not usable in United States) | |
| |
HR220, Hot Rod Only, 220 Volts -- $1,265.00 | |
| |
KITHRK220, Hot Rod Kit, 220 Volts -- $1,639.50 | |
| 600, 5-1/2" Straight Blade -- $44.00 | ||
| 800, 7-1/2" Straight Blade -- $46.00 | ||
| Blades and Stops NWFW, Flat Ni-Chrome Wire, per foot -- $10.00 WCP, Wire Crimping Tool -- $18.00 |
||
 |
|
Hot Rod Cord and Handle |
| |
HRP02, Hot Rod Cord and Handle -- $495.00 |
|
||||||
|
1055 Nine North Drive, Alpharetta, GA 30004 USA
TOLL FREE: 1.800.325.7540
TEL: 770.772.7448 FAX: 1.888.534.8383
Contact Form